Xerox MF Series Technical Document Download Page 64

Page: 64 / 191

- 16 -

MG 252 787 467 - A

SUBJECT:

OTOR

DRIVE

Tools

• Phillips screwdriver.

Preliminary steps

• Remove the control panel / scanner chassis - printer (worksheet D5).

Disassembly

• Free the wires that supply the motor drive from their cable guide.

• Remove the two mounting screws. Disconnect the grounding lug.

• Remove the motor drive. Remove and keep the 44/18 pinion.

Assembly

• Unpack and visually inspect the new parts.

• Fit the 44/18 pinion on the motor drive.

• Pass the wires in the wire guide. Connect the grounding lug in the original location.

• Screw in and tighten the two mounting screws.

Mounting screws

44/18 pinion

Motor drive

SUBJECT:

OTOR

DRIVE

Summary of Contents for MF Series
































































































































































































Search results

Summary of Contents for MF Series

Reviews:

Related manuals for MF Series

Brands by name

Popular brands

Xerox MF Series, Technical Document

Search results

Summary of Contents for MF Series

Reviews:

Related manuals for MF Series

Brands by name

Popular brands