Xerox MF Series, Technical Document

Page: 47 / 191

- 27 - IG 252 787 467 - A
If this transmission is not possible for any reason, print out the Remote Readout parameters or
display the copy counter and note these values on the intervention report.
9. SAVING DATA ON EEPROM CARD
The control panel is equipped with a reader that can read and write on EEPROM cards in I2C format
(“directory card”).
The printer consumables worn state is stored in EEPROM memory (on the CPU board) and can be seen
by
MENU 8 6 (in percent) regarding the number of pages initial values.
The printer counters are saved in EEPROM memory too (on the CPU board). These absolute counters
show the global use of the machine regardless of consumables: number of printed pages, number of
scanned pages, number of transmitted/received pages.
They can be seen by
MENU 8 2 and printed with MENU * 1 (parameters printout)
The directory cards can be used to save the entire directory (with the e-mail addresses) and optionally
the technical parameters.
• Archiving/restoring of the directory only: MENU 16 .
• Archiving of the directory and the parameters: MENU * 5 .
• Restoring of the directory and the parameters: MENU * 9 .
Simplified List of the Parameters Saved on a Directory Card
• General Parameters
- Softswitches
- Fax number of the machine
- Mnemonic of the machine
- Index number of the rerouting address list
- Reduced-tariff hours for transmission
- Dialing prefix
- Passwords for keyboard and direct dialing locks
- Stanby mode progr
technical parameters 76 / 90 / 91 / 92 / 93 cf User Guide
Chapter 3.
• Scan/print Parameters
- Default scan mode
- Number of copies to print
- CIS/Scanner/printer settings
- Management modes of the paper trays
- Enabling of fax answering machine mode
• Fax Communication Parameters
- Type of STN network
- Transmission mode
- Transmission report printout mode
- Fax transmission/reception rate
- Number of rings
- Header (LIC) transmission and printing
• Internet/LAN Communication Parameters
- Data rate
- Internet provider