C.P. Bourg Document Finisher (BDFx)
System Dependencies and Prerequisites
Listed below are the dependencies and prerequisites for
installing the BDFx, BCFx and SQEDG module.
•
The printer must be equipped with a Bypass Transport to
enable In-line Finishing.
•
It is highly recommended that the printer is equipped with a
Bourg Sheet Rotator (BSR) to maximize output.
•
Due to the height of the bypass transport on DocuPrint it is
not possible to attach the BCFx without the BSR.
•
Requires a minimum of 2 skipped pitches (3 skipped pitches
with BCF), which results in low productivity with small
booklets. (A3/ 11 x 17 requires only one skipped pitch with or
without the BCF.)
Configuration Guide
The Configuration Guide contains diagrams over the various
Finishing Solutions that are currently supported.
IOT
STACKER
BDFx
BSR
STACKER
BYPASS
TRANSPORT
BCFx
SQEDG
BDFx
BSR
BDFx
BDFx
BSR
BDFx
BCFx
BDFx
SQEDG
BCFx
SQEDG
BDFx
BSR
BCFx
SQEDG
BDFx
Printer Configurations
Finisher Configurations
4-3
Summary of Contents for Docutech 128
