Xerox DocuPrint N17, User Manual

Page: 48 / 102

Loading Paper
4-18
❖
DocuPrint N17/N17b User Guide
1
Open the paper drawer, and wait until tray fully lowers.
If you are not changing paper size, go to Step 3 below.
Otherwise, continue to Step 2.
2
Adjust the end and side paper guides for paper size.
Ensure that both the top and bottom of the paper guides
are seated into the correct size slots.
3
Load paper using the opening in the side of the drawer.
Refer to Figure 4.5 on page 4-19 for correct paper
orientation.
The type of paper loaded (plain, prepunched,
letterhead, transparency, etc.) must be set using the
Tray 2 Type (or Tray 3 Type) item in the Control
Panel’s Tray Menu (refer to Chapter 3 of the System
Administrator Guide).