Xerox DocuPrint 96, Operator'S Manual

Page: 269 / 548

STATUS AND PRINT TASKS
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE 8-9
Transparencies
Transparencies:
•
Can feed only from the processor feeder trays (trays 1 and 2)
•
Are printed only in simplex (one-sided) mode
•
Must be delivered to the sample tray.
The Transparencies task allows you to override or request the use of
transparencies for a particular print job. The Transparencies task:
•
Can be entered only when the system is idle (that is, not
printing and not engaged in any nonprinting tasks)
•
Causes or cancels the use of transparencies in the next print
job.
Once the job has printed, the transparency control returns to
the coding in the job stream. (Refer to the
Xerox DocuPrint 96/
DocuPrint 96MX LPS PDL Reference
for additional
information.)
Transparencies task To cause printing on transparencies, enter the following command:
TRANS YES
To cancel printing on transparencies, enter the following command:
TRANS NO
Note: You must still ensure that either transparency or regular
stock is loaded in the appropriate feeder trays.