Xerox DocuPrint 96, Operator'S Manual

Page: 289 / 548

FILE CONTROL TASKS
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE 9-13
When no parameters are specified, the system defaults to all fonts
and all logos in the font and logo file catalogs.
REVIEW
Use this command to review each file in a directory with the option of
deleting it.
Syntax REVIEW [ disk-id ]{ file-id [, file-id ,...]}
Parameters Table 9-13 shows the syntax parameters of the REVIEW command.
After the operator requests the set of file names in a file type
displayed, the file names are displayed one at a time. The operator
has the option of deleting a file by entering D or exiting the display
process by entering the X command.
Any response other than D or X (for example pressing the space bar)
results in the current file being retained and the next file name being
displayed. Any file name containing a period or dollar sign cannot be
deleted and is displayed with the message
*PROTECTED*
.
RNAME
Use this command to change the name and/or directory type of a file.
After the file name has been changed, the original name is deleted
from the file directory.
Syntax RNAME old-file-id new-file-id
If the file-type part of the new file-id is not specified, the file type is the
same as the old file. (Masking does not apply to this command.)
Table 9-13. Parameters of the REVIEW command
Parameter Description
disk-id
Refers to the system disk (DP0:, DP1:, DP2:,
DP3:) that contains the specified directory.
file-id
Refers to the name of a file and the file directory in
which it resides. The form used is
file-name.file-
type
as previously defined. To delete a file from
the system, the operator must have an
appropriate level of access; refer to the Setting file
access and task execution privileges" section in
chapter 1. (Masking can be used for this
application.)