Xerox DocuPrint 96, Installation Planning Manual

Page: 14 / 116

INTRODUCTION
xiv XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS INSTALLATION PLANNING GUIDE
Customer responsibilities
Your responsibilities prior to, during, and after installation of the LPS
are to:
•
Identify the primary interface with Xerox.
•
Select and prepare the site for LPS installation (including
adequate power and air conditioning).
•
Obtain the necessary interfaces, cables, transceivers, phone
lines, and so forth, if connecting to other equipment.
•
Plan for and schedule installation activities.
•
Monitor progress for a successful installation.
•
Order and maintain supplies.
•
Work with your Xerox or Xerox Limited representatives to
determine requirements for initial applications.
•
Work with representatives from the company you have
purchased any additional equipment from (such as finishers).
Note: Be sure that your system specialists are familiar with the
operating system software specific to your LPS; operating
system software is not the same for all laser printing systems. If
your system specialists are familiar with one of these operating
systems and you are converting to or adding another, they
should learn the differences.
•
Select operators and system specialists, and schedule their
training.
Note: In a mixed environment where there are a variety of
printing systems, discuss print quality differences with your
Xerox or Xerox Limited service representative.
Training Operator training is conducted at your site shortly after the LPS has
been installed. Operators receive hands-on instruction on printing
jobs, maintenance, and problem solving.
Xerox offers a number of workshops and self-paced courses that
teach advanced skills, including Advanced Customer Training (ACT).
Contact your sales representative for additional information about
these courses, or call Xerox Customer Education at 1-800-445-5554.
(Refer to the “Documentation and training” section of the,
“Preinstallation” chapter.)