Xerox DocuPrint 96, Installation Planning Manual

Page: 21 / 116

LPS OVERVIEW
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS INSTALLATION PLANNING GUIDE 1-3
System user interface (keyboard display)
The system user interface consists of a keyboard and display. Figure
1-3 shows the keyboard display.
Figure 1-3. Keyboard display
1/4-inch cartridge tape drive The 1/4-inch cartridge tape drive, also called the QIC, is located in
the front panel of the system controller. It is used for system
generation (sysgen), disk save and restore (DSR), and file loading/
backup for online systems. The 1/4-inch cartridge tape drive is not an
input source for print jobs.
System disk One 1.2 GB unformatted system disk is provided with the Xerox
DocuPrint 96/DocuPrint 96MX system controller as a standard
feature. The system disk is located inside the system controller and
stores the LPS operating system software, fonts, forms, and general
user files.
Operator control panel The system controller is powered on or off, booted, and switched
between local and remote operation using the buttons on this panel,
as shown in figure 1-4.
Figure 1-4. Operator control panel
1 Power On switch
2 Power Off Switch
3 Power On indicator
4 Boot switch
5 Remote switch and indicator
6 Local switch and indicator