Xerox Docuprint 75, Installation Planning Manual

Page: 21 / 68

Installation Planning Guide Safety notes
DocuTech/DocuPrint 75/90 and DocuPrint 75 MX 2-9
Europe The controller requires a 220-240V, 13 or 10 Amp grounded
receptacle.
Controller cautions
Follow all safety cautions, warnings, and instructions marked on
the controller.
• Ensure that the voltages and frequency rating of the power
receptacle match the electrical rating label on the equipment.
• Do not make electrical or mechanical modifications to the
equipment.
• Use the power cable that is supplied with your controller. Do
not use an extension cord, or remove or modify the power
cord plug. If the plug must be changed, a qualified electrician
must install the plug correctly on the power cord.
• Plug the power cable directly into a correctly grounded
electrical outlet or into the power strip that is connected to
this outlet. If you are not sure whether or not the outlet is
correctly grounded, consult a qualified electrician.
• Do not use an adapter to connect the controller to an
electrical outlet that lacks a ground connection terminal.
• The power switch functions as a standby type of device only.
The power cord serves as the primary disconnect device for
the system.
• Do not push objects into slots or openings on the equipment.
Electrical shock or fire may result.
• Do not obstruct ventilation openings. These openings
prevent overheating of the controller.
Printer power on/off indicator
A power-on/power-off indicator shows the state of the power for
the printer. This indicator is located to the left on the top front of
the printer and has a rectangular shape. This indicator glows
green when printer power is on and emits no light, is colorless,
when the printer power is off.