Xerox Docuprint 75, Installation Planning Manual

Page: 46 / 68

Installation Installation Planning Guide
4-14 DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
Figure 4-15. Unlock and lock actions for the casters
• Push the printer from the right side (the side with the swivel
casters) so that you can steer it easily.
• At the new location, ensure that the safety requirements can
be met.
• Attempt to place the equipment in the preferred location as
shown in this chapter, in
Figure 4-5. If the standard location is
not possible, use one of the other locations.
• Ensure that the space requirements are met.
• Re-establish all power strip, controller, modem, and printer
connections.
To replace the monitor:
1. Place the monitor on the printer.
2. Tilt the front of the monitor upwards.
3. Install the ends of the front wire bracket into the front two
holes. (The wire bracket crosses over the base of the
monitor.)
Unlock
Lock