Xerox DocuPrint 4890, Manual, Page: 38 / 76

Fuser lubricant and pressure roll wiper
4-10 Guide to Performing Routine Maintenance
CAUTION
Make sure the smooth side of the wiper is facing the pressure
roll.
14. Center the wiper on the pressure roll. Pull up the wiper and
place the upper rod onto the brackets on both ends of the
pressure roll, as shown.
15. Remove and dispose of the gloves in a trash receptacle,
being careful not to let any residue come in contact with your
skin.
16. Close the fuser drawer by pressing down on the green latch
(A), and push the fuser drawer in until it latches in place.