Xerox DocuPrint 4890, Manual, Page: 28 / 76

Stitcher wire
3-2 Guide to Performing Routine Maintenance
–
IF UNABLE TO FIX, PRESS CONTINUE
TO RESUME WITHOUT STITCHING
–
STITCHER IS OUT OF WIRE
PRESS ‘CONTINUE’ TO RESUME PRINTING.
If you continue printing the job without replacing the wire, the
documents print without being stapled. The printer status display
shows the following message:
OUT OF WIRE
Contact your key operator or your service representative when
you see this message. This should seldom happen because the
representative checks the wire supply on each service call and
replaces the spool as needed.
To continue printing without replacing the wire, press the
Continue button. The document is then printed without being
stapled.