Xerox DocuPrint 4890, Manual, Page: 27 / 76

Guide to Performing Routine Maintenance 3-1
3. Stitcher wire
The Wire Percentage indicator is located on the printer control
console of systems configured with a stitcher/stacker. The
indicator displays approximate percentage of stitcher wire
remaining on the spool. Your service representative can set the
display to flash at a predetermined percentage as a warning that
you are running low on stitcher wire.
Figure 3-1. Stitcher wire indicator on printer control console
NOTE: The percentage that displays on the wire percentage
indicator is a close approximation.
When the stitcher spool empties, the printer stops, and you see
the following displays on the printer control console:
• The status display shows the fault code L152.
• The message window displays the following sequence of
messages, with the next message appearing each time you
press i:
–
STITCHER IS OUT OF WIRE OR
SPOOL NOT ROTATING PRESS i
–
TRAINED OPERATOR CHECK WIRE
MANAGEMENT SYSTEM. PRESS i