XEROX DOCUPRINT 4850/4890 IPS GUIDE TO PERFORMING ROUTINE MAINTENANCE
6-1
6.
6
Waste containers
The waste container in the DocuPrint 4850/4890 IPS collects dry ink
and developer after it has been used by the printer. When the
container becomes full, it must be replaced, or the printer eventually
stops printing. This chapter contains the procedures for replacing the
dry ink and developer waste container.
Checking and replacing the developer waste container
Waste from the developer housings is transported into a sealed
container located in the lower left corner at the front of the printer.
The waste material is a mixture of black and color developer, and is
not reusable.
When the message
REPLACE DEVELOPER WASTE CONTAINER
displays on the printer control console, 1500 more prints can be
produced before the printer stops. The printer does not resume
printing until you replace the container. The Attention light is a
modulated yellow by this stage.
Summary of Contents for DocuPrint 4850 IPS
Page 44: ...INKS 5 14 XEROX DOCUPRINT 4850 4890 IPS GUIDE TO PERFORMING ROUTINE MAINTENANCE...
Page 52: ...WASTE CONTAINERS 6 8 XEROX DOCUPRINT 4850 4890 IPS GUIDE TO PERFORMING ROUTINE MAINTENANCE...
Page 58: ...BYPASS TRANSPORT 7 6 XEROX DOCUPRINT 4850 4890 IPS GUIDE TO PERFORMING ROUTINE MAINTENANCE...
