XEROX DOCUPRINT 4850/4890 IPS GUIDE TO PERFORMING ROUTINE MAINTENANCE
3-1
3.
3
Stitcher wire
The Wire Percentage indicator is located on the printer control
console of IPS systems configured with a stitcher/stacker. The
indicator displays approximate percentage of stitcher wire remaining
on the spool. Your service representative can set the display to flash
at a predetermined percentage as a warning that you are running low
on stitcher wire.
Figure 3-1.
Stitcher wire indicator on the 4850/4890 printer
control console
Note:
The percentage that displays on the wire percentage
indicator is an approximation and has a small margin of error.
When the stitcher spool empties, the printer stops, and you see the
following displays on the printer control console:
•
The status display shows the fault code L152.
•
The message window displays the following sequence of
messages, with the next message appearing each time you
press i:
—
STITCHER IS OUT OF WIRE OR
SPOOL NOT ROTATING. PRESS i
—
TRAINED OPERATOR CHECK WIRE
MANAGEMENT SYSTEM. PRESS i
—
IF UNABLE TO FIX, PRESS CONTINUE
TO RESUME WITHOUT STITCHING
—
STITCHER IS OUT OF WIRE
PRESS ’CONTINUE’ TO RESUME PRINTING.
Summary of Contents for DocuPrint 4850 IPS
Page 44: ...INKS 5 14 XEROX DOCUPRINT 4850 4890 IPS GUIDE TO PERFORMING ROUTINE MAINTENANCE...
Page 52: ...WASTE CONTAINERS 6 8 XEROX DOCUPRINT 4850 4890 IPS GUIDE TO PERFORMING ROUTINE MAINTENANCE...
Page 58: ...BYPASS TRANSPORT 7 6 XEROX DOCUPRINT 4850 4890 IPS GUIDE TO PERFORMING ROUTINE MAINTENANCE...
