![background image](http://html1.mh-extra.com/html/xerox/docuprint-4512/docuprint-4512_user-manual_3314190087.webp)
U N I X P r i n t i n g
C h a p t e r 5 : T C P / I P C o n f i g u r a t i o n
❖
5-29
7. Designate a spooler directory and press
, or accept
the default spooler directory displayed and press
.
8. Designate a remote system name and press
.
9. Designate
PORT1
as the remote system printer name and
press .
10. You are asked to enter the name of a printcap symbol
from a displayed list. Type
Q
and press
.
11. Your configuration is displayed. You are asked whether
these values are final. Type
Y
or
N
and press
. An
example is shown on the next page.
1. Add comments to the printcap file. For example, you can
type:
Dick's printer down the hall
2. Select
exit
to save your configuration and press
.
You are now prepared to print.
Setting Up a SCO UNIX Remote Printer to Use lpd
Set up a remote printer on the host that sends jobs to a NIC
using lpd. Use the following procedures to do this:
1. At the prompt, type:
mkdev rlp
lp (line printer)
STR
rm (remote host)
STR
Printer Server Card_host
rp (remote printer)
STR
PORT1
sd (spooler directory)
STR
/usr/spool/lpd7
Note
You cannot run
mkdev rlp
twice. If you have additional
printers to be configured, use the
rlpconf
command.
Book.frm : CHAP5.FRM Page 29 Saturday, October 12, 1996 7:43 AM