![background image](http://html2.mh-extra.com/html/xerox/docuprint-180/docuprint-180_system-generation-manual_3649199024.webp)
SAMPLE SYSTEM CONFIGURATIONS
3-4
XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE
Table 3-4.
Sample configurations
Option
Description
0) None
Returns you to the base system configuration display screen.
1) Full memory test
Determines the amount of system memory test at power on.
2) Auto boot
Determines whether auto boot is enabled at power on.
3) Message display
Determines whether boot diagnostic messages display at power on.
4) Shared disk
Adds or removes the shared disk option.
5) MICR mode default
This option is not supported on the DocuPrint 180 LPS. Selection of option
5 has no effect on the LPS.
Adds or removes the MICR mode default option.
6) On-line interface (if
installed)
Displays the following question:
DOES THIS SYSTEM HAVE AN ONLINE INTERFACE?
ENTER ’Y’ OR ’N’.
If you enter N, the online feature is removed from the system being
generated.
If you enter Y, the configuration options are automatically selected by the
system and the display returns to the base configuration.
7) Xerox
DocuPrintServer
(formerly XPSM)
Adds or removes the Xerox DocuPrintServer (formerly XPSM)).
8) Kanji
This option is not supported on the DocuPrint 180 LPS. Adds or removes
Kanji.
9) Ethernet (if installed)
This option is not supported on the DocuPrint 180 LPS. Selection of option
9 has no effect on the LPS
Displays the following question:
IS THIS SYSTEM CONNECTED TO A XEROX ETHERNET? ENTER ’Y’
OR ’N’
.
If you enter N, the Ethernet feature is removed from the system being
generated.
If you enter Y, the following suboptions display:
ETHERNET CHANGE LIST:
1) NONE
2) READ PRINTER’S ADDRESS
3) ETHERNET NETWORK ADDRESS
Selecting NONE results in no Ethernet changes.
Selecting
READ PRINTER’S ADDRESS
results in the printing system
providing its internal address as a parameter to the sysgen processor.
This address is shown in table 3-2, Base system configuration for
DocuPrint 180 LPS, in both hexadecimal and decimal format. The decimal
value is preceded by an asterisk (*). (The printing system internal address
is set by Xerox at the time of manufacture.)
Selecting
ETHERNET NETWORK ADDRESS
results in a prompt for the
address of the Ethernet network. For a decimal value, enter six zeros. A
value not preceded by an asterisk is assumed to be hexadecimal. (The
network address is assigned by Xerox. Consult your network system
administrator for the correct assignment.)
Summary of Contents for DocuPrint 180
