Xerox DocuPrint 180, System Generation Manual

Page: 50 / 94

SYSGEN AND SYSGEN-RELATED PROCEDURES
4-22 XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE
Steps to perform an online update sysgen
The following table lists the steps used to perform online update
sysgen.
Table 4-5. Steps to perform an online update sysgen
Step Action System Response
1. Load the SST tape or cartridge tape on the
selected peripheral device.
Verify the existence of sufficient disk
space, using the FCHECK command. Each
disk must have a minimum of 3000
contiguous sectors free. If the number of
available sectors is below 3000:
•
Compress the disk.
•
Back up as many files as necessary to
obtain the minimum number of free
sectors.
•
Delete the saved files from disk.
Refer to the DocuPrint 180 LPS Operations
Reference
for additional information.
2. Press the Boot button. The Boot menu window displays:
Operating System
System Disk
Reel to Reel
QIC
18/36 Track Tape
3. PC UI:
Select System Disk from the Boot menu.
The command menu displays:
COMMANDS Display commands
BOOT Boot the operating system
SYSGEN Build or update system files on
disk from tape or host
FORMAT Format and initialize disk pack
HOSTCOPY Copy user files from host to disk
AUTO Auto Sysgen
MINI Configuration change only
ERASE Erase all files
4. Enter SYSGEN and press <ENTER>. This starts the current processor sysgen procedure and the
following message displays:
* Sysgen program running *
System ID is: xxxxx
Do you want to enter a new system id? ’y’ or
’n’