Xerox Document Centre Series, User Manual

Page: 32 / 61

Page 20 Xerox Document Centre User Guide
Making Copies
Load your Originals
If using the Document Feeder...
1. Place the originals into the Document Feeder face up,
with page one on top. The originals should be in good
condition, and without staples or paper clips.
2. Adjust the edge guides against the original.
Otherwise, the copies may print incorrectly or the
originals may jam.
For fastest performance, place the originals Long Edge
Feed with the top of the document away from you.
If using the Document Glass...
Use the Document Glass to copy bound, stapled, folded
or wrinkled originals, odd or oversize documents, books,
or glossy photographs.
1. Raise the Document Glass Cover.
2. Place the original face down into the top left corner of
the glass. Ensure that the top left corner of the original
fits into the corner of the registration edge.
When using the copy features; Auto Paper, Auto%, Auto
Center, or Bound Originals, the cover must be raised.
Press Clear All
If necessary, press the Clear All button to reset the
selections that were made for the previous job.
The feature values will also reset to their default values
after a time interval set by your Machine Administrator
has elapsed.
Document Feeder
Edge Guides
Document Glass