Xerox Document Centre Series, User Manual

Page: 55 / 61

Xerox Document Centre User Guide Page 43
Try T
h
es
e
Jobs
Using Build Job and Sample Set
Applications
Produce multiple sets of a document where individual
segments require unique feature program selections.
Solution
1. In the Job Assembly Tab, select Build Job and then
Save. Select Sample Set and Save to produce a single
complete set for review.
2. Load the originals for the first job segment.
3. Program the appropriate features for the first segment
of the job then press the Start ( ) button.
The appearance of the End Build Job button indicates
that the copier is in the image collation mode. Repeat
this procedure for each remaining segment.
4. After the final segment has been scanned, press End
Build Job. Because Sample Set was selected, a single
review set will be produced.
5. After you review the initial set, press the Job Status
button to display a listing of queued jobs. Touch your
job to highlight it. If you are satisfied, press Release.
Press Delete if you are dissatisfied.
TIP Use Build Job to copy a job of more than 50 originals
with the Document Feeder.