Page 48
Xerox Document Centre User Guide
Copying Bound Documents using Build Job
Typical Application
Copy a multipage article that is spread throughout a
bound document all at once.
Procedure
1. Open the Document Cover and place the bound
original on the Document Glass. Align the spine of
the bound document with the Book Binding mark.
2. Make your programming selections by touching the
screen. The most common selections are on the
Basic
Copying
Tab (Output, 2-sided Copy, Reduction/
Enlargement, and Paper Supply).
3. Use the keypad to enter the number of copy sets.
4. Depending on the configuration of your machine
press the
More Copy Features
Tab or the
Job
Assembly
Tab. If the
More Copy Features
Tab is
selected press the
Job Assembly
Tab.
5. Select
Build Job
then the
Build Job On
button. Press
Save.
6. Press the
Bound Originals
button then press the
button that identifies which pages you want to copy.
7. Press the
Start
(
) button.
8. Repeat this process until all the pages you want to
copy have been scanned.
9. Press
End Build Job
.
Summary of Contents for Document Centre 240 DC
Page 2: ......
Page 70: ...Page 58 Xerox Document Centre User Guide...
Page 74: ......
Page 75: ......