Xerox DocuMate 515, User Manual

Page: 9 / 105

Installation
4 DocuMate 515 Scanner User’s Guide
Installation
Installation is a quick, four-step process:
1. Assemble the scanner
2. Install the software
3. Connect the power supply
4. Connect the USB cable and turn on the power
Before You Begin
Please make sure of the following before you begin installation:
• The information in this guide may cover software not provided
with the scanner you purchased. Disregard any information
about the software not applicable to your chosen product.
Please visit our web site at www.xeroxscanners.com for the
latest software updates for your Xerox DocuMate 515 scanner.
• If your computer has AntiVirus or AntiSpyware software running,
you may see messages during installation asking you to allow
the installation to proceed. Although the messages will differ
based on the software your computer is running, in each case
you should allow the installation to proceed. Alternatively, you
can turn off the AntiVirus or AntiSpyware software before
installing your scanner. But if you do, make sure to turn it back
on again when installation is finished.
• If you already have a scanner connected to your computer, it is
recommended that you remove that scanner’s driver program
prior to installing your Xerox DocuMate 515 scanner. If you
previously had a Xerox or Visioneer desktop scanner you should
uninstall that scanner driver before proceeding. You can remove
these programs from the Windows Add/Remove programs list.
Please refer to the user manual provided with your other
scanner hardware for instructions about removing the driver
and software for that unit.
• If your computer is running Windows Vista, you may see the
Vista User Account Control screen asking you to confirm system
changes. Click the Continue button to allow the installation to
proceed.