Xerox DocuMate 152i, Scanning Manual

Page: 5 / 65

User’s Guide 1
Scanning from TWAIN
and WIA
Important : Before scanning, please take a moment to read through the scanner’s user guide for
important instructions about how to use the scanner.
The scanner user guide includes information on what type of documents can and cannot be
scanned with your scanner. It also contains full setup and installation instructions, maintenance
and troubleshooting procedures, scanner specifications, and scanner warranty information. The
guide is located in the user guides section on the installation disc.
The information in this guide will cover hardware and software features that may not be available
for the scanner model you purchased. Please disregard any information that does not apply to
your scanner.
Some of the illustrations in this guide may not look exactly as they appear on your computer’s
screen. The differences are minor and do not affect the steps to use the features.
Note: Visioneer Acuity must be installed for the image processing options, described in this
document, to be available in the interface for your scanner. Only features that are appropriate for
your scanner will be enabled after Visioneer Acuity is installed. Visioneer Acuity is automatically
installed when you install the scanner driver from the installation disc. If you downloaded the
scanner driver from our website, make sure you also download and install Visioneer Acuity.
Accessing the Scanner Interface
Visioneer OneTouch : Open the Visioneer OneTouch properties window and under the
configuration list select Configure Before Scan . Click on OK to save the changes and close
Visioneer OneTouch. The next time you scan using that button, the TWAIN interface will open for
you to set the scan options and start scanning.