2
53
2.3 Loading Paper
After aligning the edges of the sheets,
Align the “
▼
”mark on the horizontal guide
clip with the appropriate paper size mark.
Check that the vertical guide clip stopper is
inserted into the proper hole in the scale.
Automatic paper size detection cannot be as-
sured if the vertical guide clip is even slightly
out of position. If this occurs, slide the vertical
guide clip momentarily to the left edge, then
reposition it according to the scale.
Push the paper tray firmly into the end of
the printer/copier.
2.3.2
Loading Paper in the Multi Sheet Inserter (MSI)
The procedure for loading paper in the Manual Tray is as follows.
To avoid paper jams, do not set different sizes of paper in the tray at the same
time, and do not add paper to the tray before it empties.
Do not load paper into the tray that has been printed on one side. This can
cause paper jams.
Summary of Contents for DocuColor DocuColor 4
