Xerox DocuColor 5000, User Manual, Page: 95 / 164

DocuColor 5000 User Guide
4-19
4. Accessories
Clear Top Tray and Stacker Tray paper jams
To clear the HCS Top Tray, remove all paper from the Top Tray.
Perform the following steps to clear a jam from the HCS Stacker
Tray area and resume printing.
1.
Press the
Unload
button on the HCS Control Panel. The
Wait light blinks until the Stacker Tray has reached the down
position.
2.
Open the front door when the Unload Light illuminates.
3.
Position the securing bar on top of the stacked paper.
4.
Pull the HCS Stacker Cart straight out.
5.
Reach into the HCS and remove any jammed paper.
6.
Push the Stacker Cart straight into the HCS.
7.
Position the securing bar on the fixed area inside the HCS.
NOTE:The front door will not close if the securing bar is not
properly attached to the HCS frame.
8.
Close the HCS front door.
9.
Follow the instructions displayed on the digital press UI to
resume printing.
Maintenance
Do not clean any area inside the HCS unless otherwise instructed
by Xerox. If the covers or Front Door require cleaning, dampen a
paper towel or soft, clean cloth with a liquid, nonabrasive glass
cleaner or water.
To avoid damage to the HCS, do not pour or spray the cleaner or
water directly onto the HCS. Always apply the liquid to the cloth
first.
Do not use any other cleaners or solvents on the HCS as they
may interact with the paint on the covers, eventually causing the
paint to peel.