Xerox DocuColor 5000, User Manual, Page: 140 / 164

DocuColor 5000 User Guide 7-4
7. Maintenance
5.
Clean the belts, outlined in yellow:
NOTE: It is recommended that you use the lint-free cloth supplied
with your digital press, Xerox part number 19K03610.
• Use a lint-free cloth to wipe the belts
• Using the lint-free cloth, rotate the belts in the direction that
paper travels; refer to the arrow in the above
illustration. Continue to wipe the belts as you rotate them.
NOTE: Do not rotate the belts with your bare hands as this will
leave grease and dirt on them and create paper jams. Rotate the
belts by using a lint-free cloth.
• Continue to rotate and wipe the belts until all the belts are
clean.
6.
Clean the areas between each belt by wiping them with a
lint-free cloth.
NOTE: It is recommended that you use the lint-free cloth supplied
with your digital press, Xerox part number 19K03610.
7.
Clean the sensors (circled below) with a lint-free cloth.