background image

3

3-20

ColorWise Pro Tools

14.

Click OK to confirm printing of the measurement page.

15.

Retrieve the page from the copier.

16.

Follow the directions in the dialog box for placing the Kodak Gray Scale strip and the 
AutoGray measurement page on the copier glass, and click Continue.

Messages display the progress of the gray balance adjustment. 

17.

From the Copier Control Panel, select Menu > Scan > Job Template.

18.

Choose the desired calibration template: AutoCal or ColorCal.

Do not use the screen to edit the Template Description or make any other changes.

19.

Press the DocuColor 3535 Scan button (large green button).

20.

When the adjustment is complete, click OK (in Color Editor).

Color Editor displays the adjusted output profile curve. New edit points have been 
inserted by AutoGray to modify the gray balance, in much the same way an expert user 
would have done manually.

21.

To make edits to the output profile curve, click AutoGray again.

22.

Choose Refine to fine-tune the curve, or New to acquire a new curve for editing.

For more information on these steps, see 

page 3-19

.

23.

On the Copier Control Panel, press the Access button.

24.

Enter your password.

25.

Select Confirm.

26.

Choose System Settings > System Settings > Scan Mode Setting > Others.

27.

For Color_space, select 0 (sRGB). 

28.

Select Close until the System Settings screen is displayed.

29.

Select Exit.

Summary of Contents for DocuColor 3535













































































































Reviews: