![background image](http://html2.mh-extra.com/html/xerox/docucolor-2060/docucolor-2060_administration-manual_3296759021.webp)
T
O O L S
M
O D E
D
O C U
C
O L O R
2060/2045 S
Y S T E M
A
D M I N I S T R A T I O N
G
U I D E
TO
O
L
S
M
O
D
E
1–21
2
Follow the directions on the screen and touch the button for the value you wish
to adjust.
3
Touch the up or down arrow buttons until the value you want is displayed in the
field above the arrow buttons.
KEY POINT:
You should not adjust the value more than 5 counts at a time.
4
Touch the
Enter
button on the screen.
5
Repeat steps 2, 3, and 4 to enter other new values.
6
Press the
Start
button on the Control Panel to enter the new values into the
system.
KEY POINT:
It is recommended that you run the Check Gradation procedure
for the screening type that you are adjusting. Do a before and after comparison
to verify your changes.