C
C-5
Troubleshooting
Message requests a paper size
that you don’t have
•
Cancel the job and do one of the following:
If you are printing a PostScript file, set the Convert Paper Sizes setting in Printer Setup
on the Control Panel to convert the job to the paper size you do have. You can do this to
convert between US and metric paper sizes. See the
Administrator Guide
for
information.
If you are printing a file from an application, change the page size in the Page Setup
dialog box.
Test page or other special
Control Panel page doesn’t
print
1.
If the message “Ripping” displays on the Control Panel, but the page never prints,
restart the Fiery SI, press the Menu button to enter Setup, and verify that the Printer
Model in Printer Setup is specified correctly.
2.
Check the copier’s display.
If the copier display says
Ready to copy
, proceed to step 3.
If the display shows a diagnostic or error message, take the appropriate corrective action,
as described in the copier manual.
3.
Try making a copy.
If you can make a copy, proceed to step 4.
4.
Restart the Fiery SI, and when you see Idle on the status line of the Fiery SI display, try
printing a test page again.
If the test page still fails to print, contact your authorized service/support center.
If this happens:
Try this:
Summary of Contents for Digital copier printers
Page 1: ...US ER G UI D E for Xerox digital copier printers Fiery SI Color Server...
Page 43: ...33 12 Printing with PC Compatible Computers 7 Click the Graphics tab...
Page 51: ...44 3 Scanning documents 6 Click Prescan The image appears on the left side of the window...
Page 104: ...66 26 Color Calibration The rest of the curve adjusts to match the endpoint...