![background image](http://html1.mh-extra.com/html/xerox/digital-copier-printers/digital-copier-printers_user-manual_4108261022.webp)
1
1-7
Using the Control Panel
Starting and shutting down the Fiery SI
Generally, you can leave the Fiery SI running all the time. This section describes how
to shut down and restart the Fiery SI when necessary.
Starting the Fiery SI
To start the Fiery SI, move the switch on the rear of the Fiery SI to the On position.
Diagnostic messages appear on the Control Panel. If any diagnostics fail, more
information and instructions appear. Contact your service representative if the Fiery SI
encounters problems while running the diagnostics.
When the diagnostics are finished, the following message is displayed:
For software update or setup press any key
If you want to change the Setup options, press one of the buttons; if you do not press a
button, the Fiery SI continues starting up and displays the message
Idle
when it is
ready to receive data.
Power switch in the
off position
Summary of Contents for Digital copier printers
Page 1: ...US ER G UI D E for Xerox digital copier printers Fiery SI Color Server...
Page 43: ...33 12 Printing with PC Compatible Computers 7 Click the Graphics tab...
Page 51: ...44 3 Scanning documents 6 Click Prescan The image appears on the left side of the window...
Page 104: ...66 26 Color Calibration The rest of the curve adjusts to match the endpoint...