Xerox C3000 Facsimile Reference Manual Download Page 129

Page: 129 / 298

Canceling a Transmission

119

Press

[

Exit

]

twice.

The standby display appears.

Note

❒

To cancel transmission to some destinations that a fax is sent to, see “De-
leting a Destination from a Simultaneous Broadcast”.

❒

If you cancel a transmission while the file is being sent, some pages of your
file may have already been sent and is received at the other end.

❒

If the transmission finishes while you are carrying out this procedure,
transmission cannot be canceled.

❒

If multiple destinations were specified, only the number of destinations for
unsent documents appears.

❒

If multiple destinations were specified, only one destination number ap-
pears. To display all destinations, press

[

Check / Change Settings

]

Reference

p.176 “Deleting a Destination from a Simultaneous Broadcast”

Summary of Contents for C3000











































































































































































































































































































Search results

Summary of Contents for C3000

Reviews:

Related manuals for C3000

Brands by name

Popular brands

Xerox C3000, Facsimile Reference Manual

Search results

Summary of Contents for C3000

Reviews:

Related manuals for C3000

Brands by name

Popular brands