Xerox C3000, Facsimile Reference Manual

Page: 111 / 298

Sender Settings
101
1
Sender Settings
Use this function to set sender information.
If the sender's e-mail address is registered in the destination list, the sender can
receive transmission results by e-mail.
Also, if you enable the Stamp Sender Name, the registered sender's name (user
name) appears on the receiver's sheet, lists, and report.
Important
❒
In the destination list, register senders, specify their e-mail addresses, and set
the User Name as
[ Sender ] in advance.
❒
If user authentication is set, the user logged in is set as sender. The transmis-
sion result is sent to the logged-in user's e-mail address.
A
Place the original, and then select the scan settings you require.
B
Press [ Sender Name ] .
C
Select a sender.
To select a sender by specifying the registration number registered in the Ad-
dress Book, press
[ Registration No. ] .
To search for a sender from the Address Book, press
[ Search ]
.
If a destination protection code is set, the entry screen appears. Enter the pro-
tection code for destination using the number keys, and then press
[ OK ]
.