Xerox C3000 Facsimile Reference Manual Download

Page: 139 / 298

Confirming Transmission Results by E-mail

129

Select the destination of notification, and then press

[

]

If you make a mistake, before pressing

[

]

, press

[

Clear

]

or press the selected

Destination key again to turn the highlight off.

[

E-mail TX Results

]

gets highlighted and the destination of notification selected

appears.

Press

[

]

To check the settings, press

[

TX Mode

]

The standby display appears.

Specify a destination, and then press the

{

Start

}

key.

Note

❒

You can program one of the Quick Operation keys with operations for this
function. Using the Quick Operation key allows you to omit step

Reference

“Facsimile Features”, General Settings Guide

Summary of Contents for C3000











































































































































































































































































































Search results

Summary of Contents for C3000

Reviews:

Related manuals for C3000

Brands by name

Popular brands

Xerox C3000, Facsimile Reference Manual

Search results

Summary of Contents for C3000

Reviews:

Related manuals for C3000

Brands by name

Popular brands