Xerox C230, User Manual, Page: 45 / 194

Networking
C Coonnnneeccttiinngg tthhee PPrriinntteerr ttoo aa W Wii--FFii N Neettw woorrkk
Note: This feature is available only in some printer models.
Before you begin, make sure that:
• Active Adapter is set to Auto. From the control panel, navigate to Settings > Network/Ports >
Network Overview > Active Adapter .
For non-touch-screen printer models, to navigate through the settings, press OK .
• The Ethernet cable is not connected to the printer.
U Ussiinngg tthhee w wiirreelleessss sseettuupp w wiizzaarrdd iinn tthhee pprriinntteerr
Before using the wizard, make sure that the printer firmware is updated. For more information, see
Updating Firmware .
1. From the home screen, touch > Set up now .
2. Select a Wi-Fi network, and then type the network password.
3. Touch Done .
U Ussiinngg tthhee SSeettttiinnggss M Meennuu iinn tthhee PPrriinntteerr
1. From the home screen, touch Settings > Network/Ports > Wireless > Setup On Printer Panel >
Choose Network .
2. Select a Wi-Fi network, then type the network password.
Note: For Wi-Fi-network-ready printer models, a prompt to set up the Wi-Fi network appears
during initial setup.
C Coonnnneeccttiinngg tthhee PPrriinntteerr ttoo aa W Wiirreelleessss N Neettw woorrkk U Ussiinngg
W Wii--FFii PPrrootteecctteedd SSeettuupp ((W WPPSS))
Note: This feature is available only in some printer models.
Before you begin, make sure that:
• The access point (wireless router) is WPS-certified or WPS-compatible. For more information, see
the documentation that came with your access point.
• A wireless network adapter is installed in your printer. For more information, see the instructions
that came with the adapter.
• Active Adapter is set to Auto. From the control panel, navigate to: Settings > Network/Ports >
Network Overview > Active Adapter .
For non-touch-screen printer models, press OK to navigate through the settings.
Xerox ® C230 Color Printer
User Guide
45
Set up, install, and configure