background image

Paper Jams 

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 Quick Reference Guide

123

Paper Jams in Cover A – page 124
Paper Jams in Cover B – page 125
Paper Jams in Cover C – page 126
Paper Jams in Cover E – page 126
Paper Jams in Trays 1, 2, and 3, 4 (Optional) – page 127
Paper Jams in the Tandem Tray Module (Optional) – page 127
Paper Jams in Tray 5 (Bypass) – page 128
Paper Jams in the Duplex Module Cover D (Optional) – page 128
Paper Jams in the Finisher (Optional) – page 129

Media jams happen for a variety of reasons. Check the guidelines below to reduce 
potential jams in the machine.

• Use only recommended media. Refer to 

Supported Paper Sizes in the Paper and 

Other Media chapter on page 89

 and Machine Specifications in the Specifications 

chapter on User Guide for a list of recommended media types.

• Protect unused media by storing it in its wrapper, on a flat surface.

• The orientation of the media in the paper tray must match the orientation of the 

documents.

• Check the maximum fill line in the tray to make sure the paper tray is not overloaded.

• Do not use media that is torn, wrinkled, or folded.

Tray 4 - Tandem Tray Module 
(Optional)

Finisher Top Cover

Finisher Transport

Cover F

Tray 3 - Tandem

Tray Module

(Optional)

Finisher Tray

Summary of Contents for C123 Copycentre



























































































































































Reviews: