Printing
Phaser 7500 Color Printer
User Guide
60
4. When the control panel prompts you to confirm the type and size of paper in the tray, press the
OK
button to use the current tray setup. If you loaded a new size or type of paper in the tray, do
the following:
a. Select
Change setup
, then press the
OK
button.
b. Select the appropriate paper type, then press the
OK
button.
c.
Select the appropriate paper size, then press the
OK
button. For some sizes that can be loaded in
either direction, you need to select the size with the letters LEF (Long-Edge Feed). If you loaded a
custom paper size, select it if it is already defined. If not, select
New Custom Size
for the paper
size and follow the prompts; see
Using Custom Size Paper
on page 73 for more information.
Short-Edge Feed
Use short-edge feed for sizes that do not fit long-edge feed or when the media curls or peels, such as labels.
1. Open Tray 1 (MPT).
2. Load the paper or other media with the short edge against the printer.
•
For
single-sided
printing, place side one
facedown
, with the top of the page entering the
printer
first
. Prepunched holes should be at the
front
of the printer.
7500-036
7500-123
Summary of Contents for 7500/DN - Phaser Color LED Printer
