Xerox 721, Operator'S Manual, Page: 48 / 72

PROBLEM SOLVING
40
XEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL
Clearing Media Jam (J-05)
When a jam J-05 occurs, the media jams while feeding from the
Manual Bypass Shelf.
1. Open the Right Side Door and turn the Inner Transport
Assembly handle to release the transport. Lower and lock the
transport by engaging the Down Lock.
2. If the media is not cut and the leading edge of the media has
reached the Drum or beyond the Drum, rotate the Cutter
handle to cut the media. Continue rotating the cutter handle
so that the green home position indicator appears in the cut
out.
3. If the leading edge of the media has reached the Fuser Unit,
open the Exit Cover and remove the jammed media by rotating
the Fuser Handle.
4. Release the Down Lock while holding the handle of Inner
Transport Assembly and lift it up gently until it stops. Then
twist the handle to the left to move the transport to the home
position. Finally, turn the handle to the right to lock the
transport.
5. Pull to open the top drawer, middle drawer, and Manual
Bypass Shelf.
6. Remove any media from the inside of the printer.
7. Close and latch the drawers and Manual Bypass Shelf.
8. Reload the media on the Manual Bypass Shelf, curl side
down.
MF
D1
D2
D3
D4
PF
Exit
Copy Density
Menu
Enter Online
Fuser
Handle
Cutter
handle
Inner Transport handle
Down Lock
EX
P-CLEAN
W IRE- CLEAN
D1
MF
D2
D3
D4
EXIT
PF
COPY DENSITY
MENU
EN TER
RESET
→
←
*
P APER
DECK
CUT
S ELECT
1
2 3 4