Printer Settings
Phaser® 6360 Color Laser Printer
4-14
Changing the Load Paper Timeout
When your print job is formatted for a type or size of paper that is not loaded in the printer, the
printer’s control panel displays a message requesting you to load the appropriate paper. The
Load Paper Timeout value controls the amount of time the printer waits before printing on
another type or size of paper. The default is 3 minutes.
To change the Load Paper Timeout value, use one of the following options:
■
The printer’s control panel
■
CentreWare IS
Using the Control Panel
To change the Load Paper Timeout value on the control panel:
1.
Select
Printer Setup
, and then press the
OK
button.
2.
Select
Paper Handling Setup
, and then press the
OK
button.
3.
Select
Load Paper Timeout
, and then press the
OK
button.
4.
Scroll to the desired timeout value. The values (
None
,
1
,
3
,
5
, or
10
minutes,
1
hour or
24
hours) indicate the length of time you want the printer to wait for you to load paper
before printing. If you select a value of
None
, the printer does not wait for paper to be
inserted and immediately picks paper from the default tray.
5.
Press the
OK
button to save the change.
Using CentreWare IS
To change the Load Paper Timeout value using CentreWare IS:
1.
Launch your web browser.
2.
Enter your printer’s IP address in the browser’s
Address
field (http://xxx.xxx.xxx.xxx).
3.
Click
Properties
.
4.
Select the
General
folder on the left navigation panel, and then select
Printer Defaults
.
5.
Scroll to the desired
Load Paper Timeout
value in
Timeout Settings
. The values (
None
,
1
,
3
,
5
, or
10
minutes,
1
or
24
hours) indicate the length of time you want the printer to
wait for you to load paper before printing. If you select a value of
None
, the printer does
not wait for paper to be inserted and immediately picks paper from the default tray.
6.
Click the
Save Changes
button at the bottom of the screen.
