Printer Settings
Phaser® 6360 Color Laser Printer
4-12
Setting the Duration for the Tray 1 (MPT) Prompt
The Tray 1 (MPT) prompt setting specifies the amount of time the prompt displays on the
control panel after paper is loaded in the tray. The Tray 1 (MPT) prompt requests the user to
confirm the current tray setup or to specify the correct paper type and size for the print job.
To select a Tray 1 (MPT) prompt setting, use one of the following options:
■
The printer’s control panel
■
CentreWare IS
Using the Control Panel
To select the Tray 1 (MPT) prompt setting on the control panel:
1.
Select
Paper Tray Setup
, and then press the
OK
button.
2.
Select
Tray 1 (MPT) Prompt
, and then press the
OK
button.
3.
Select the appropriate duration, and then press the
OK
button.
Using CentreWare IS
To select the Tray 1 (MPT) prompt setting using CentreWare IS:
1.
Launch your web browser.
2.
Enter the printer’s IP address in the browser’s
Address
field (http://xxx.xxx.xxx.xxx).
3.
Click
Properties
.
4.
Select the
General
folder on the left navigation panel, and then select
Printer Defaults
.
5.
Select the appropriate setting in the
Tray 1 (MPT) Prompt
drop-down list.
6.
Click the
Save Changes
button
at the bottom of the page.
Duration
Behavior
None
Turns the tray setup prompt off.
30 Seconds
(Factory default setting)
Displays the tray setup prompt for 30 seconds after paper is
loaded in Tray 1 (MPT).
Infinite
Displays the tray setup prompt after paper is loaded in
Tray 1 (MPT) until a control panel selection is made. The printer
will not print until a selection is made.
