manualshive.com logo in svg

Xerox 6279, User Manual

Share
Download
Xerox 6279 User Manual Download Page 26

2. Move the printer Power switch to the On position (up).

3. Press the Power button on the front of the Controller to turn it on.

The Power button indicator will illuminate. The Control Panel will display the message
“Printer Warming Up”. The machine will be print-ready in about 3 minutes.

System Power Off Procedure

CAUTION

Powering down the system incorrectly may result in data corruption and a service
call.

The system shutdown selection allows the Controller to power down correctly. System
Shutdown is performed through the Web Printer Management Tool or through the
System Administration screen. In some environments, only authorized persons will be
allowed to power down the system, therefore requiring the System Administrator
password.

Xerox

®

 6279

®

 Wide Format Solution

1-16

Copy/Scan User Guide

Product Overview

Summary of Contents for 6279

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands