S e l e c t i n g a P a p e r S o u r c e
2-34
❖
4 5 0 5 / 4 5 0 5 p s o r 4 5 1 0 / 4 5 1 0 p s U s e r ’ s G u i d e
You do not have a lower base installed. You want to use
pre-printed stationery for the first page and regular stock for
the other pages of your document. Neither your software
application nor your printer driver has the capability to ask
for the first page of a document from a different source than
the remainder of the document. It is assumed your
pre-printed stationery is the same size as your regular stock.
1.
Load the standard tray with regular paper stock.
2.
Put one page of the pre-printed stationery in the MP tray
(face down).
3.
Set
Source Mapping
for “Standard” to “MP-Standard.”
4.
Set
MP
Tray Size
to the same size as your pre-printed
stationery.
5.
In your application, set paper source to Standard.
The printer will pull the first page from the MP tray and all
other pages from the standard tray.
Make sure there is one sheet of pre-printed stationery in the
MP tray each time you print this document.
Example 8
AUG-CH02 Page 34 Black,Red,Cyan Tuesday, March 21, 1995 5:06 PM
