manualshive.com logo in svg

Xerox 4505/4505ps, User Manual

Share
Download
Xerox 4505/4505ps User Manual Download Page 183

 

D i s p l a y e d   C o n t r o l   P a n e l   M e s s a g e s

 

C h a p t e r   7 :   T r o u b l e s h o o t i n g  

 

❖

 

 

 

7-17

 

Warning 300/EXE

 

This message appears in PCL when the printer has changed resolution to 300 or 
page protection to Executive; appears in PostScript when the page size is Executive 
and the printer has changed resolution to 300.

This is a transient warning to advise that, due to insufficient memory to print with 
the requested settings, either the resolution or page protection has been changed.

The message clears when the next job prints.

ACTION: None

 

Warning 300/FOL

 

This message appears in PCL when the printer has changed resolution to 300 or 
page protection to Folio; appears in PostScript when the page size is Folio and the 
printer has changed resolution to 300.

This is a transient warning to advise that, due to insufficient memory to print with 
the requested settings, either the resolution or page protection has been changed.

The message clears when the next job prints.

ACTION: None

 

Warning 300/LGL

 

This message appears in PCL when the printer has changed resolution to 300 or 
page protection to Legal; appears in PostScript when the page size is Legal and the 
printer has changed resolution to 300.

This is a transient warning to advise that, due to insufficient memory to print with 
the requested settings, either the resolution or page protection has been changed.

The message clears when the next job prints.

ACTION: None

 

Warning 300/LTR

 

This message appears in PCL when the printer has changed resolution to 300 or 
page protection to Letter; appears in PostScript when the page size is Letter and 
the printer has changed resolution to 300.

This is a transient warning to advise that, due to insufficient memory to print with 
the requested settings, either the resolution or page protection has been changed.

The message clears when the next job prints.

ACTION: None

 

Figure 7.2

 Control Panel messages

 

 (continued)

 

Message

 

Description/Action 

AUG-CH07  Page 17  Black,Cyan  Friday, February 3, 1995 12:34 AM

Summary of Contents for 4505/4505ps































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands