T e s t M e n u
3-62
❖
4 5 0 5 / 4 5 0 5 p s o r 4 5 1 0 / 4 5 1 0 p s U s e r ’ s G u i d e
Figure 3.22 describes each
Test Menu
function. See
“Setting
a Menu Option” (page 3-10)
for the steps in performing a
Test
Menu
function.
Figure 3.22 Test Menu functions
Function
Description
Config. Sheet
Configuration Sheet to show the printer’s current information and menu settings.
The Configuration Sheet contains a variety of information such as:
• Number of sheets printed to date.
• Total printer memory (RAM) available.
• Firmware versions for the printer controller.
• Firmware versions for Ethernet, LocalTalk, and Token Ring, when installed.
• PostScript revision level, when installed.
• Current menu settings.
• Information on installed options, including the lower base.
The Configuration Sheet is printed from the
Default Source
(page 3-21) at the
current
Resolution
setting (page 3-27), both specified in the PCL Menu, using A4
(210x297) paper if the System Menu setting for
Defaults
(page 3-60) is
Europe
, or
using Letter (8.5x11) paper if
Defaults
is
USA
.
Config. Sheet
will cause a printer reset.
Demo Page
Note: This option is
available for firmware
releases > 4.0 only. To
determine the firmware
release of your printer,
print a Configuration
Sheet.
Demo Page listing Connectivity, Paper Handling, Print Quality and Page Description
Languages of the printer.
The Demo Page is printed from the
Default Source
(page 3-21), specified in the
PCL Menu, at 600 dpi using A4 (210x297) paper if the System Menu setting for
Defaults
(page 3-60) is
Europe
, or using Letter (8.5x11) paper if
Defaults
is
USA
.
Demo
Page
will cause a printer reset.
Test Menu
Functions
AUG-CH03 Page 62 Black,Red,Cyan Friday, February 3, 1995 12:22 AM
