S e l e c t i n g a P a p e r S o u r c e
2-28
❖
4 5 0 5 / 4 5 0 5 p s o r 4 5 1 0 / 4 5 1 0 p s U s e r ’ s G u i d e
To avoid a paper jam, do not remove the standard or lower
tray while the printer is feeding paper.
You have a lower base installed. You want to load as much
paper in the printer as possible. You use only one size of
paper. You do not do manual feeding.
1.
Load the standard, lower, and MP trays with regular
paper stock.
2.
Set
Source Mapping
for “Standard” to “Low-Std-MP.”
3.
Set
MP Tray Size
to the same size as the regular stock.
4.
In either your software application or the Xerox printer
driver, set paper source to the standard tray.
The printer will pull paper from the lower tray until it is
empty, then from the standard tray until it is empty, then from
the MP tray. When either the lower or standard tray is
reloaded, the printer will pull paper from it again.
!
Caution
Example 2
AUG-CH02 Page 28 Black,Red,Cyan Tuesday, March 21, 1995 5:06 PM
