manualshive.com logo in svg

Xerox 4400DT - Phaser B/W Laser Printer, Service Manual, Page: 332 / 503

Share
Download
Xerox 4400DT - Phaser B/W Laser Printer Service Manual Download Page 332

Phaser 4400 Laser Printer Service Manual 

6-139

RRP 11.19 Size PWB

See the Parts List on 

page 7-22

.

Caution: These components are susceptible to electrostatic 

discharge. Observe all ESD procedures to avoid damage.

Warning: Switch off the power and disconnect the Power Cord.

1.

Remove the printer from the 550-Sheet Feeder (

RRP 11.1 Printer Removal

 on 

page 6-120).

2.

Remove the Tray from the Feeder.

3.

Remove the 550-Sheet Feeder Left Cover (

RRP 11.3 550-Sheet Feeder Left Cover

 

on page 6-122).

4.

Remove the 550-Sheet Feeder Size Harness Assembly (

RRP 11.16 550-Sheet 

Feeder Size Harness Assembly

 on page 6-135).

5.

Remove the Size Sensor Housing Assembly (

RRP 11.17 Size Sensor Housing 

Assembly

 on page 6-136).

6.

Remove the Size Sensor Housing (

RRP 11.18 Size Sensor Actuators

 on 

page 6-138).

7.

Disconnect P/J53 from Tray Size PWB.

8.

Remove the two screws that secure the Size PWB to the Size Sensor Housing 
Assembly.

9.

Remove Tray Size PWB.

Tray Size PWB

Summary of Contents for 4400DT - Phaser B/W Laser Printer
























































































































































































































































































































































































































































































































Reviews:

No comments