Companion to Getting Started with Scanning Services
Page 2 - 5
2
. NetW
ar
e
Set Up Scanning
1. Enter System Administrator Setups:
A. Press the [Access] button on the DC220/230/332/340ST
Control Panel.
B. Using the keypad, enter [
#22222]
(or the current System
Administrator password) and then press [Enter] on the
Control Panel Touch Screen. You must enter the # character
before entering 22222.
2. Access the Scan to File Setups screens and assign the Default
Repository Server:
A. Select [Additional Setups] (if necessary) and select [Scan
To File Setups].
NOTE
The Job Template Pool and Update All Templates options located
on the Scan to File Setups screen are not used in this environment.
B. Select [Default Repository].
C. Select [NetWare].
D. Select [Server].
E. Select [Edit] and enter the name of the NetWare file server
that has the user account for the scanner. Select [Save] when
finished.
Optionally, up to four other public repositories can be setup
in addition to the Default Repository. The additional
repositories can provide password and directory path
information for templates selected with matching server and
user names.
3. Assign the Default Repository Path:
A. Select [Directory Path] and then select [Edit] and enter the
full path, including the volume name, to the directory for the
scanner account. For example:
(volume name):\(directory name)\(directory name)
NOTE
It is strongly recommended that you do not use a directory in the
SYS volume, since it could quickly fill up with scanned files.