2-9
Getting Started
Selecting The Terminal Emulation
When you load TeemTalk for the first time, the DEC VT100 emulation will be
running by default. All the terminal emulations supported by TeemTalk can be
accessed from the
Emulation Settings
dialog box. This is displayed by selecting
Settings
in the menu bar then
Emulation...
The emulations available are listed in the
Emulation
list box.
To change the current emulation mode, select the emulation required then click the
OK
button. The emulation setting may be saved so that TeemTalk will automatically
run it when it is loaded or reset by selecting the
Save Session
option in the
File
menu.
A brief description of the emulation options follows.
VT52
and
VT100
modes enable you to run applications written for the DEC VT52
and VT100 terminals, respectively.
Tek
mode provides compatibility with software designed to drive the Tektronix 4100
or 4200 series terminals. Emulation of the Tektronix 4014 terminal can be achieved
by selecting this option and setting the
Dialog Area Enabled
option in the
Dialog
Settings
dialog box to
0
.
Edit
mode provides compatibility with software designed to drive the DEC VT100
terminal. In this mode the following features are set to pre-determined conditions:
A. The dialog area is enabled and visible.
B. The dialog area buffer and scrolling region are set to 24 lines.
C. Cursor origin mode is set to Absolute (refer to the description of
the
Cursor Origin
option in the
Dialog Settings
dialog box).
Summary of Contents for -05W
