Xerox -05W, User Manual

Page: 161 / 370

9-9
ICL FTF File Transfer
Text Storage Code
Factory default: Host Default
This specifies the code in which data is stored at the remote system. Usually you can
leave this set to
Host Default so that the remote system decides for itself what code
the data is stored in.
Print
Factory default: Unselected
When selected, this will cause the file to be printed by the remote host after it has
been received.
Special Options
This enables you to specify any special options to be actioned by the remote system.
If you are transmitting to VME you can specify special options in the following
format:
keyword=value[,keyword=value,...]
The relevant keywords are:
ALL influences the placement of new fully catalogued files
PRE B - Transfer records map on to physical blocks
R - Transfer records map on to CTM records
FDE File description to be used
For new fully catalogued files, the description used will be :STD.STDM, modified by
one or more of the following values, provided that at least one of them is supplied:
BLO BLOCKSIZE
CLA CLASS
RMI RMIN
RMA RMAX
RTY RTYPE
ORG ORG
LOC For spool requests, defines the location at which the output is required.
PRF For spool (VME/B only) and job requests, defines the profile under
which they should run.
Action Message
The message entered in this text box may be displayed to the remote operator when
the transfer begins, depending on the remote system (not for VME).