Xerox -05W, User Manual, Page: 165 / 370

10-3
FTP File Transfer
The Local and Remote Directory boxes enable you to specify the start directories
(and drive name if required) that FTP will automatically attempt to locate and
display in the
TTWFTP window when a session is connected. The normal default
directory (home) will be displayed if no directory is specified or the directory is
not accessible.
Click the Connect button at the top right corner of this dialog box. TeemTalk will
attempt to connect to the specified host. If the connection is successful, you will
be returned to the
TTWFTP window after a few seconds.
If you specified a particular local directory in the Connection dialog box then
this will be displayed in the left hand list box, otherwise the home directory is
displayed by default.
The right hand list box will display the contents of the remote host directory,
which will be the home directory by default if you did not specify a particular
remote directory in the
Connection dialog box. If you did specify a remote
directory, then FTP will attempt to access and display it. If unsuccessful, then the
normal default directory will be displayed. Note that Tandem will not list
subdirectory information. The
ftp> box at the bottom of the window will display
messages about each operation as it is performed.
You can display information about the system you are currently connected to in
the status line at the bottom of the window by selecting the first item in the
Remote Directory list box. The status line can also display information on the
currently selected file or the first file in a group of selected files.