13
EN
•
Remove the connected device if this is causing the earthing
leakage.
•
Press the Reset button for 2 seconds.
•
The isometer will reset itself and will again run through the
self-test.
Settings menu
The isometer's settings may not be changed. The Menu button
has, therefore, been protected with a password. If you have a
real reason why you would want to change the settings, please
contact us.
Information display
E01= PE connection error, no low resistance between E and KE.
E02= system connection error, no low resistance between L1 and
N.
E03 to Exx = internal error report.
= password activated
W A R R A NT Y A N D S ER VIC E
The ISO series is supplied with the Xenteq "Smart
Value" service label. This label will give you
additional benefits and assurances with regard to service. Read
more about this on our website.
You can take the device back to your supplier or send it straight
to the address on the reverse should there be a fault. Please
ensure you pay for the postage when sending the isometer. The
ISO series has a 2 year guarantee as from the purchase date on
the parts and labour costs related to its repair. The guarantee
period is only applicable if the purchase form (copy) is submitted
when the isometer is sent in for repair. The guarantee will no
longer apply with regard to repair work performed by third parties,
when used incorrectly or with the connection of the inverter.
The customer is responsible for the use of this isometer. The
manufacturer cannot be held liable for any (consequential) losses.
